Emu Cannole Grosser niedriger Tisch - 23 Weiss

Cannole Large low table from Emu

The Cannolè seating system by Anton Cristell and Emanuel Gargano has a fully welded structure made of galvanized steel tubes inside and out. The seat consists of a galvanized bar grid welded to a bar frame. The legs are made of tubular steel. Pre-treatment and finishing with MIG welding, degreasing and cataphoresis with thermosetting polyester powders. The collection consists of: Corner modular sofa, linear modular sofa, stool, low armchair and low table. All Cannolè cushions are made of polyurethane rubber to which a layer of polyester fiber resin is added. All cushions are wrapped in a water-repellent inner cushion cover made of polyamide.

Label

Emu

Designer*in

Gargano-Cristell

Material

Steel

Mass

Ø: 105 cm / H: 45 cm

Weight

16.8 kg

Note

Static load: 100 kg

Note

To keep the product in good condition for a long time, we recommend storing it in closed, dry rooms in winter to prevent condensation. If the products are stored near the sea, we recommend cleaning the metal surfaces with water or detergent and a soft cloth every three months before the start of winter and protecting them with Vaseline oil or car wax.
Rinse with plenty of water. Avoid the use of abrasive cleaning agents and brushes.
On painted surfaces, regular waxing of the frame with high-quality car wax or a commercially available protective product is recommended to help maintain or
restore the surface gloss of the paintwork.
Protective products are available from hardware stores or similar outlets. Caution at sea: When used in a marine environment, salt can accumulate in "crevices" on the product and quickly attack the paintwork from there.
In a swimming pool environment, on the other hand, chlorine can accumulate on the coating and damage it.
In both environments, repeated condensation and evaporation processes can lead to the accumulation of these corrosive and aggressive substances, particularly in crevices on the product. Regular cleaning with mild, biodegradable liquid soap and water will ensure that these concentrated deposits are removed and the surface coating of the furniture is protected in accordance with the above instructions.
Maintenance interval: - Aggressive environment (sea, industrial areas, swimming pools): every 3 months; - Average environment (urban areas): every 6 months; - Low pollution environment (rural areas): every 12 months. In the case of tables, it is advisable not to put them away with the table tops in direct contact with each other and to store them in dry, well-ventilated places to avoid the formation of condensation.

Design / Made In

Italy